| Name | Wire Twisting Forceps |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;010286;01-0286;PM914;PM-914;1440-15; |
| Specialty | Neuro, Ortho & Spine-Wire Twisters |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | seemab surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
Wire Twisting Forceps
13.0 mm jaw length, 5-1/2″ (14.0 cm)?Wire Twisting Forceps are specially designed forceps required to manipulate and twist off wire after it has been secured. Many procedures require the use of wire to stabilize a graft or to give the areas that was operated on additional support. This confers additionally stability thus reducing likelihood of trauma during the recovery period. Often the wire segments that are inserted must be secured by twisting. This instrument features jaws with serrations on them that allow for reduced slippage.
Description
Shipping & Delivery
Related products
Flush Wire Cutter – Tungsten Carbide
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)?Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Blunt Jaw Pliers
5-1/2" (14.0 cm)?Blunt Jaw Pliers can be used in a variety of surgical procedures that require the insertion and manipulation of wires. This instrument features slightly rounded handles which makes it easy to hold and operate manually and is a traditionally utility poliers with adjustable jaws. The blunt jaws prevent breakage and splintering of the wire and allows for increased pressure to reshape it to the appropriate shape. Wires can be used to approximate fractures or can be inserted through skin and bone to provide traction on the bone.
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)?Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)?Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Kirschner Bow
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Flat Nose Pliers – Slender Jaws
slender jaws, 2.0 mm tip, 6" (15.2 cm)?Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Front & Side Wire Cutter – Tungsten Carbide
tungsten carbide jaws, double-action, 1/16" (1.7 mm) maximum capacity, 7-1/8" (18.1 cm)?Front and Side Wire Cutter is designed for use in surgical procedures that require manipulation of the length of surgical wire. In procedures such as laminectomies or total hip replacements insertion of a wire is necessary to confer some stability to the newly operated upon region. Not only does this give stability but speeds up the healing time and prevents trauma to the area during the healing process. This particular cutter is a front and side cutter and features double action tungsten carbide jaws that has a maximum capacity of 1.7 mm.
Locking Pliers
reinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release?Locking Pliers can be used to shape and use wire in many different surgical procedures. A unique feature of this instrument is a reinforced jaw hinge as well as a self-locking lever with adjustment. This makes this instrument highly versatile and able to adapt to a variety of surgical scenarios. Additionally this instrument has a one-handed quick release and is available in three different lengths 7", 8" and 10".
