Olivecrona Rongeur
7-3/4" (19.6 cm), straight handle, curved jaws, 3.0 mm x 16.0 mmReiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.
Olivecrona Rongeur – Heavy Pattern
7-3/4" (19.8 cm), heavy pattern, strongly curved jaws
Olivecrona Rongeur is an instrument designed to be used to scoop out and gnaw away at bony segments in a variety of surgical procedures. The jaws of this instrument features a scoop type profile that allows them to be used in enlarge holes in bone or other hard tissue or be used to grasp and cut small bony pieces. This particular piece is made of a heavy pattern and features strongly curved jaws that allows it to be used to handle very strong tissue areas.
Orthopedic Mallet
solid stainless steel?Orthopedic Mallet is designed for use in a wide variety of surgical procedures that require manipulation of bone either cutting, splitting or scraping via chisels or gouges. This mallet features a solid stainless steel head that resists changing shape and thus applies the full force wherever it is intended. It is most suited to apply force to the opposite end of an osteotome or gouge to assist in driving the blade portion through hard tissue. This instrument is available in two sizes: one pound with 1 ?" head or 3 pounds with 1 7/8" head making it well suited for a wide variety of surgical scenarios and surgeon preferences.
Orthopedic Mallet – 10 3/4″
solid stainless steel head, 10-3/4" (27.5 cm)?Orthopedic Mallet is designed for use in a wide variety of surgical procedures that require manipulation of bone either cutting, splitting or scraping via chisels or gouges. This mallet features a solid stainless steel head that resists changing shape and thus applies the full force wherever it is intended. It is most suited to apply force to the opposite end of an osteotome or gouge to assist in driving the blade portion through hard tissue. This instrument is available in two sizes: one pound with 1 ?" head or 3 pounds with 1 7/8" head making it well suited for a wide variety of surgical scenarios and surgeon preferences.
Parallel Pliers
maximum capacity 1/2", parallel grooved 10.0 mm jaws, 7" (17.8 cm) Parallel Pliers are designed for use in removal of pins as well as in general handling of pins and wire. The parallel grooved jaws provide extraordinary gripping ability for pin removal. A variety of orthopedic procedures require the insertion and removal of pins to stabilize fracture repairs or to hold certain areas of bone together. The maximum capacity of this instrument ?".v
Parallel Pliers & Wire Cutter
double-action, 7-1/4" (18.4 cm)?Parallel Pliers & Wire Cutter is a two-in one instrument with double-action jaws that can be used for the removal and insertion of pins but also in cutting pins and wire. Wire can be used in surgery to stabilize and approximate fracture repair or by being inserted directly through skin and bone to provide traction on the bone. This instrument can be used in shaping and crafting the wire or pins but also can be used to cut through to make it the length that is required.
Peapod Ivd Rongeurs
angled up, 5-1/2" (14.0 cm)?Peapod IVD Rongeurs are ideally suited for use in neurosurgical procedures of the spine such as discectomies or arthoplasties. These rongeurs are designed to manipulate the intervertebral disc layers that are found between adjacent vertebrae. This instrument features ringed handles for ease in manual handling and is available in three sizes: small, medium and large making it possible to find the perfect fit for any patient need or surgeon preference.
Pelvic Retractor
24.0 mm blade, 10-3/4" (27.0 cm)Pelvic Retractor is designed for use in retraction of pelvic structures and other lower abdominal structures during surgical intervention. This retractor features a fenestrated handle that makes it easier to grip and reduces slippage while maintaining a lightweight design. Additionally the head of the instrument is designed to fit the contour of the pelvic structures to give the best ability to leverage and retract.
Percy Amputation Shield
12" (30.5 cm)?Percy Amputation Shield is a specialized piece of equipment that can be used during amputation procedures. This instrument is designed as a shield to provide protection when performing an amputation and removal of a particular portion of the body. This instrument measures 12" long. Additionally this shield is crafted from German operating grade stainless steel with unparalleled longevity.
Perthes Bone Awl
Perthes Bone Awl can be used in many different surgeries that require handling of bone. Specifically it can used on orthopedic surgeries to do a wide variety of things such as creating or enlarging holes in bone. This can also be useful in spinal surgeries to create pilot holes in vertebrae that can be enlarged using a drill. The unique aspect of this instrument is the handle which is made to be gripped perpendicular to the point making it easy to use manually with increased precision.
Pin Cutter – End Cutting
end cutting, stainless?Pin Cutter is ideally suited for use in trimming surgical pins. This cutter features scissoring handles that fit comfortably in the hand for manual operation. A variety of procedures require the insertion of pins to stabilize an inserted graft or to hold together certain portions of bone during the procedure. Procedures such as fracture repair of the hip or other bones necessitate an instrument such as a pin cutter to modify the pins to an appropriate length for each individual patient. This instrument is available in three lengths and three different cutting capacity including a diameter of 3.2 mm, 4.7 mm or 6.4 mm making it suitable for a vast array of pins. Additionally this cutter is end cutting and is crafted from stainless steel.
Pin Cutter – End Cutting, Tungsten Carbide
end cutting, tungsten carbide?Pin Cutter is an instrument ideally suited for use in a variety of surgical procedures that require insertion and length adjustment to wire. A unique feature of this instrument is the pin block which minimizes the changes of the jaws being overloaded. Additionally there is an adjustment nut which enables the blades to be adjusted during heavy use or after the blade has been replaced. This instrument is suited for side cutting and is available in three lengths 16", 18.5" and 22" and with varied max cutting capacity 4.7 mm, 6.3 and 6.3 mm respectively.
