| Name | End Cutter – Double Spring, Large, Tungsten Carbide |
| Lead Time | 0-3 days |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
| Material Finish | Stainless Steel/Tungsten Carbide |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | seemab surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
End Cutter – Double Spring, Large, Tungsten Carbide
tungsten carbide jaws, double-action, maximum capacity 3?32″ (2.5mm), 8-1/2″ (21.6 cm)?End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32″.
Description
Shipping & Delivery
Related products
Hercules-Type Cable Cutter
replaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm)?Hercules-Type Cable Cutter can be used to trim and adjust the length of cables. This instrument features replaceable tungsten carbide blades that can be used on for cables from 1.0 mm to 2.0 mm. Tungsten carbide jaws gives this instrument added strength as it is the hardest metal made for surgical instruments and results in a supremely durable jaw that can be used for sustained cutting. Additionally this instrument is 7" long and has gold tipped handles.
Flush Wire Cutter – Tungsten Carbide
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)?Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Hercules-Type Wire Cutter – 3.0 mm Wire Max
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Delicate Wire Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm)?Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Diamond Pin Wire Cutter
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm)?Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Locking Pliers
reinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release?Locking Pliers can be used to shape and use wire in many different surgical procedures. A unique feature of this instrument is a reinforced jaw hinge as well as a self-locking lever with adjustment. This makes this instrument highly versatile and able to adapt to a variety of surgical scenarios. Additionally this instrument has a one-handed quick release and is available in three different lengths 7", 8" and 10".
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm)?End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Flat Nose Pliers
serrated jaws, 5-1/2" (14.0 cm)?Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
