| Name | McCulloch Nerve Root Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;NL9703;S1991;575761;57-5761;MDS9949703;5757-61;NL9703001;NL9703-001;575762;57-5762;NL9703-00;NL970300;5757-62;5757-61_5757-62; |
| Specialty | Neuro, Ortho & Spine-Mcculloch-Pattern Instruments |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | seemab surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
McCulloch Nerve Root Retractor
6.0 mm wide blade?McCulloch Nerve Root Retractor is a unique designed instrument made for use in neurosurgical orthopedic procedures. This retractor features a right angle that allows the instrument to be used deep in the surgical field but still maintains the handle out of the plane of surgery. One way to use this instrument is in retraction of nerve roots during procedures such a discectomy which require work in the vicinity of the nerve root and this instrument keeps it protected. This retractor is available in two lengths.
Description
Shipping & Delivery
Related products
Carbon Fiber Radiolucent Longitudinal Blade
ball snap closure, blunt? Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Beckmann-Eaton Laminectomy Retractor
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)?Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Caspar-Type Titanium Spinal Spreading System
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium?Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Caspar Nerve Root Retractor
9-1/2" (24.0 cm)?Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Blount Retractor
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Cox Metatarsal Spreader
8.0 mm x 28.0 mm blades, serrated blades, 4-1/2" (11.4 cm)Cox Metatarsal Spreader is specifically designed for use in spreading the metatarsals in procedures that require it. These spreaders are easy to handle and feature ring handled grips that aid in their maneuverability. Additionally they features serrated blades as well as a ratcheting mechanism all which aid in the versatility of this instrument to serve a particular purpose in surgery.
Cloward Style Lamina Spreader
w/ ratchet, 6-1/4" (16.0 cm)?Cloward Style Lamina Spreader is ideally suited for use in neurosurgical spinal procedures. This instrument is designed specifically to aid in widening the space between the lamina of the spinal column. It is effectively used in procedures such as laminectomies and other spinal surgeries that require stabilization and increase of that space. Additionally this spreader features a ratchet and is available with cross serrated tips or with teeth on tips to give the exact type of gripping strength required.
Cloward Style Vertebrae Spreader
w/ ratchet, 20.0 mm opening?Cloward Style Vertebrae Spreader is a unique instrument that aids in spreading and stabilization of the space between individual vertebrae. This spreader features two prongs that have a 20 mm opening as well as a ratchet that allows it to be stabled locked at a particular width. Additionally it is available in three different depths 65.0 mm, 75.0 mm and 85.0 mm making it suitable for patients of all sizes and any surgeon preference.
