| Name | U.S. Army Pattern Gouges |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;282206;28-2206;2822-06;282212;28-2212;2822-12;2822-18;2822-06_2822-18; |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | seemab surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
U.S. Army Pattern Gouges
6-1/4″ (16.0 cm)?US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
Description
Shipping & Delivery
Related products
Hoke Osteotome
5-1/2" (14.0 cm)?Hoke Osteotome is crafted for preparation and cutting of bone during neurosurgery. This instrument features a sturdy handle for ease in handling which then narrows at the neck and widens again into a blade. One potential use of this osteotome is to saw through the skull to increase access during surgery such as craniotomy. Additionally this instrument can be used to reshape bony areas. This osteotome is available in either a curved or straight profile in size sizes ranging from 3.0 mm to 16.0 mm making this a highly versatile instrument suitable for a number of surgical procedures.
U.S. Army Pattern Osteotome
6-1/4" (16.0 cm)?US Army Pattern Osteotome is a versatile instrument for use in manipulating of bone. This osteotome features a straight profile and can be used to cut bone or to carve out small pieces to allow access to more difficult to reach areas. Additionally this osteotome is crafted with a chisel type blade that can be used to scrape, clean or sculpt bone for a variety of surgical procedures. This instrument is available in three sizes 6.0, 12.0 and 18.0 mm.
Cobb Spinal Gouge
hexagonal handle, 9-1/2" (24.1 cm)?Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Mini-Lambotte Osteotome
swiss pattern, 5-1/8" (13.0 cm)?Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Lambotte Osteotome – W/Out Calibration Lines
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Hibbs Osteotome
9-1/2" (24.0 cm)?Hibbs Osteotome is made for use in neurosurgical procedures that require scraping or chiseling through bone. This osteotome features a thick handle for ease in gripping and maneuverability. The handle narrows into a slim neck which widens out again into a chisel type blade. Additionally the blade features a slight curvature increasing its ability to be used to strip or scrape away layers of bone and tissue. This instrument is available in ten sizes ranging from 6.0 mm to 38.0 mm and in either a curved or straight profile allowing it to be useful in a variety of patient scenarios and surgeon preferences.
U.S. Army Pattern Chisel
straight, 6-1/4" (16.0 cm)?US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
McCulloch Hockey Stick Chisel
8-1/2" (22.0 cm)?McCulloch Hockey Stick Chisel is a specialized instrument made for use in orthopedic spinal procedures. It is specifically used in procedures of the spine such as vertebral osteotomy and is particularly well suited with its slim handle and elongated, flattened profile. The angle at the end prevents the tip of the chisel from pierces and causing injury to the spinal cord during surgery. This instrument is available in either a right or left curve making it a versatile tool that fits any patient scenario and satisfies any surgeon preference.
